|
|
+44 (0)1753 549 360
|
|
|
|
|
|
|
|
MWS can build and restore wire wheels with beaded-edge, two-piece and Bibendum rims; a selection of these rims are held in stock. If you need a rim type not listed please contact us.
These rims rely on reinforced beads to hold the tyre in place by seating under the hooked edges of the rim. The measurement relating to the tyre size is the width across the inside of the rim, this is measured in mm in Europe and inches in America.
Click here to go to the Beaded-edge Rims section of our Shop
|
Part Number |
Description |
|
Beaded-edge Rims |
|
WSRR710X90 |
710 x 90 Cold-rolled Rim |
|
WSRR760X90 |
760 x 90 Cold-rolled Rim |
|
WSRR815X105 |
815 x 105 Cold-rolled Rim |
|
WSRR820X120 |
820 x 120 Cold-rolled Rim |
|
WSRR875X105 |
875 x 105 Cold-rolled Rim |
|
WSRR895X135 |
895 x 135 Cold-rolled Rim |
|
WSRR935X135 |
935 x 135 Cold-rolled Rim |
Click here for information about tyres to suit these rims
This early rim type uses a locking ring which acts as the second rim edge to hold the tyre in place. This design means that a rim well is not necessary to accomodate fitting of tyres. Again, the rim width measurement is taken inside the rim.
Click here to go to the Two-piece or Straight-sided Rims section of our Shop
|
Part Number |
Description |
|
Two-piece or Straight-sided Rims |
|
WSRR4X20-2PIECE |
4" x 20" Rim with Locking Ring |
|
WSRR4X21-2PIECE |
4" x 21" Rim with Locking Ring |
|
WSRR3023-2PIECE |
3" x 23" Rim with Locking Ring |
Click here for information about tyres to suit these rims
This rim type was developed in France by Michelin and is a precursor to the well-based rim. They have a well running half the circumference of the rim which allows the application of a tyre.
Click here for information about tyres to suit these rims
|
 |
|
|
|
|
|
|
|
|
UK Sales: 01753 549 360
UK Fax: 01753 547 170 | | Export Sales: +44 (0) 1753 598 382
| | Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK |
|
|
|
|
|
