Fitting & Balancing - Hubs, Splines & Caps

Fitting Tyres & Tubes Tyre Aligments Balancing Centre-lock Wire Wheels Balancing - Point to check Fitting Hub, Splines & Caps Torque Guide


Please follow the diagram when fitting Hubs / Splines and caps so that the codes on the assembly items conform with the arrows rotating towards the front.
All splines have codes which indicate whether they are to be fitted to the left or right hand side of the vehicle.

WARNING
DO NOT FIT ASSEMBLY IN ANY OTHER WAY THAN THAT WHICH IS SHOWN.

When fitting Bolt-on adaptors, it is necessary to use special wheel hub nuts and shortened studs.
See vehicle service manual for instructions on fitting integral splines.