Fitting & Balancing - Points to check

Fitting Tyres & Tubes Tyre Aligments Balancing Centre-lock Wire Wheels Balancing - Point to check Fitting Hub, Splines & Caps Torque Guide

The original high degree of balance may be affected by wheel damage as well as by factors related to the tyres, such as uneven tread wear, cover or tube repairs etc.

If roughness or high-speed steering problems occur, and the cause in not disclosed by mechanical investigation, then the complete tyre and wheel assembly should be checked for balance.
It is imperative that the hubs are located on the balancing machine in exactly the same manner as located on the car and the factory truing jigs. Alternatively, balance on the vehicle. (NB: This operation can only be done on the front wheels of your car.)